1. Peripheral cleaning
When cleaning the floor drain, you can start from the periphery of the floor drain first, and brush the sundries on it several times to remove most of the sundries, and then use a toothpick to slowly pick out the sundries that cannot be brushed out from the gap. Rinse off with wash at the end.
2. Internal cleaning
Cleaning the inside of the floor drain is more troublesome. It is necessary to cover the floor drain first. The cover of the floor drain is a movable design, and it is not easy to be unable to open it. If so, try the above two methods to deal with it, and the cover of the floor drain can basically be opened. After prying off the floor drain cover, clean the cover first, and then clean the impurities on the filter.
The filter can be taken out for cleaning. Generally, there are a lot of hair and dust flakes attached to it. If it is only washed with water, it will not be cleaned. It needs to be wiped several times with a coarse rag to remove most of the impurities on the surface, and then use a toothpick Or remove the blockages in the filter holes with sharp and small objects such as needles. After there are no impurities, rinse them clean, and then install the filter screen and floor drain cover back one by one. The cover must be restored in place.
