1. Heating should be done step by step when using for the first time
In the process of using floor heating for the first time, you need to use a slow method to heat the floor and the floor. Before installation, it is necessary to slowly heat the cement floor, preferably by 5 degrees every day, and finally it is advisable to reach 18 degrees. In the first 3 days after installation, just keep the temperature at 18 degrees, and then set the temperature according to your needs after 3 days. Be careful not to increase the heating rate at once during the period, so as to avoid cracking and deformation of the floor due to too high temperature.
2. The surface temperature should not be too high
When using floor heating, the temperature of the floor should be lower than 28 degrees, and the temperature of the water pipe should be lower than 45 degrees. If it is higher than this temperature, it will not only shorten the service life of the floor, but also affect the normal use of floor heating. In winter, only indoor The temperature can reach 22 degrees, don't set it too high.
3. Turn off the geothermal system, and pay attention to the gradual cooling
When the weather is warm and the floor heating is turned off, the temperature of the floor heating should not be adjusted too low at once. It should be lowered by a few degrees every day, as in the heating procedure, and then the floor heating should be turned off at the end. A sudden drop in temperature will affect the service life of the floor and floor heating.